2.4GHz Wireless Transceiver NRF24L01 2db with PA and LNA


This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system.
It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! Moreover, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier)

Out of stock


2.4GHz Wireless Transceiver NRF24L01 2db is based on the NRF24L01+ chip with PA and LNA board features a reverse polarized SMA connector for maximum RF range. And there are PA and LNA circuit on the board, with the external antenna it can reach long distance than the one without these parts.

This module comes with the 2.4G antenna (2DB), with 250Kbps transmission rate on open air it can reach the 800-1K meters communication distance.

2.4GHz Wireless Transceiver NRF24L01 2db Features

  • Voltage: 3-3.6V (recommended 3.3V) V
  • Maximum output power: +20dBm
  • Emission mode current(peak): 115mA
  • Receive Mode Current(peak): 45mA
  • Power-down mode current: 4.2uA
  • 2Mbps mode sensitivity in received: -92dBm
  • 1Mbps mode sensitivity in received: -95dBm
  • 250kbps mode sensitivity in received: -104dBm
  • PA gain: 20DbLNA gain: 10Db
  • LNA Noise figure: 2.6Db
  • Antenna Gain (peak): 2Dbi
  • 2MB rate (Open area): Up to 520m
  • 1MB rate (Open area): Up to 750m
  • 250Kb rate (Open area): Up to 1000m

Additional information

Weight50 g


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.