NanoDLP Shield V1.1 SLA/DLP 3D Printers Control Kit for Raspberry Pi 3


This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP’s light-cured 3D printers. It eases up the connectivity and interfacing of different parts with an integrated DRV8825 on board for motor control.

Out of stock


NanoDLP Shield V1.1 expansion board is designed for the Raspberry Pi 3B and 3B+ which is used for SLA/DLP 3D printers running NanoDLP. While filament-based 3D printers are extremely capable and slicing software is only getting better, SLA/DLP resin-based printers are able to produce prints of nearly unparalleled quality. If you want high-resolution objects and fine detail, a resin printer is the way to go.

The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP as well as DRV8825 built-in on board. See the specifications below.

NanoDLP Shield V1.1 Features

  • 9V-28V to 5V@3A Buck Converter
  • DRV8825 Stepper Driver
  • 12V Fans (cooling the Pi)
  • 2X Endstops
  • Controled MOS for ext LED driver
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Shutter support
  • 5V OUT Connector for ext Board

NanoDLP Shield V1.1 Specifications

LicenseCPL V2
Latest VersionV1.1
Fixed Port1X 12V(Same as input) and 5V
Controlled Port1X 12V(Same as input)
EndstopsZ-min /Z-max
I2C1X PinHeader-4P
Serial port1X XH2.54-4P
Stepper driver1X DRV8825@2.5A max/32 microsteps max
Output5V@3A max, 9-28V@3A max

NanoDLP Shield V1.1 Kit Components

  • 1 x NanoDLP Shield V1.1
  • 2 x Limit Switches Modules
  • 2 x Limit Switch Connecting Cable
  • 1 x Heat Sink

nanodlp shield v1.1 connectivity

NanoDLP Shield V1.1 Interface Resources & Pinout

Please visit NanoDLP Shield V1.1 Wiki

NanoDLP Download

Please visit NanoDLP.Com



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.