KY-026 Flame Sensor Module Main

KY-026 Flame Sensor Module

25.00 EGP

The KY-026 Flame Sensor Module s excellent to detect infra red emissions coming out from flames. With both digital and analog output and sensitivity setting via potentiometer.

In stock


SKU: KY-026 Category: Tags: , , , , , , , ,

Frequently Bought Together

KY-026 Flame Sensor Module Main+Arduino Nano R3 Main+400 Tie Point Breadboard Top+Dupont Wire Jumper Cables For Arduino
Price for all:   125.65 EGP

Product Description

KY-026 Flame Sensor Module is a sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive 60 degree detection sensor Two outputs mode: AO: analog output- real-time output voltage signal on the thermal resistance; DO: when the temperature reaches a certain threshold- the output high and low signal threshold adjustable via potentiometer.

KY-026 Flame Sensor Features

  • Extremely sensitive to wavelength between 760-1100nm
  • Power supply indicator lamp
  • Comparator output indicator lamp
  • AO, real-time thermistor voltage signal output
  • DO, high / low electric level signal output
  • Analog quantity output
  • Threshold rollover electric level output
  • Threshold adjusted by potentiometer
  • Detection Angle Range: About 60 degrees
  • Power Supply: 3.3-5.5 V DC

Connecting

  • Arduino GND –> Module G
  • Arduino +5V –> Module +
  • Arduino digital 4 –> Module D0
  • Arduino A3 –> Module A0

Code

//Example for KY-026
//TkkrLab
int Led = 13 ;// define LED Interface
int buttonpin = 3; // define the flame sensor interface
int analoog = A3; // define the flame sensor interface
 
int val ;// define numeric variables val
float sensor; //read analoog value
 
void setup ()
{
  pinMode (Led, OUTPUT) ;// define LED as output interface
  pinMode (buttonpin, INPUT) ;// output interface defines the flame sensor
  pinMode (analoog, INPUT) ;// output interface defines the flame sensor
  Serial.begin(9600);
}
 
void loop ()
{
  sensor = analogRead(analoog);
  Serial.println(sensor);  // display tempature
 
  val = digitalRead (buttonpin) ;// digital interface will be assigned a value of 3 to read val
    if (val == HIGH) // When the flame sensor detects a signal, LED flashes
  {
    digitalWrite (Led, HIGH);
  }
  else
  {
    digitalWrite (Led, LOW);
  }
  delay(1000);
}

Additional Information

Weight20 g

Reviews

There are no reviews yet.

Be the first to review “KY-026 Flame Sensor Module”

Your email address will not be published. Required fields are marked *