MG995 Digital Metal Gear Servo (9.5 – 11 Kgs.cm)

----

This is the most famous servo. MG995 is a digital metal gear high torque servo for RC-cars from 10 to 6-th scale  truggy and monster and many RC model.

Out of stock

Description

The MG995 Digital Metal Gear Servo is one of the most commonly used servo motors in Arduino projects. This wide range of projects include, home automation, robotics and similar applications.

MG995 Servo Specifications

  • Weight : 55 g
  • Dimension : 40mm x 20mm x 42mm
  • Stall Torque : 9.5 kg-cm at 4.8V and 11 kg-cm at 6.0V
  •  Temperature Range : 0 degree to 55 degree
  • Operating Speed : 0.20 sec/60 degree(4.8v), 0.16 sec/60 degree(6v)
  • Operation Voltage : 4.8 – 6Volts
  • Gear Type : All Metal Gears
  • Connector Wire Length : 120 mm

Connecting

  • Brown = connect to Arduino – / GND
  • Orange = connect to Arduino +5V
  • Yellow = in this example connect to Arduino Digital port 9

Code

#include <Servo.h> 
 
Servo myservo; // create servo object to control a servo 
// a maximum of eight servo objects can be created 
 
int pos = 0; // variable to store the servo position 
 
void setup() 
{ 
  myservo.attach(9); // attaches the servo on pin 9 to the servo object 
} 
 
void loop() 
{ 
  for(pos = 0; pos < 180; pos += 1) // goes from 0 degrees to 180 degrees 
  { // in steps of 1 degree 
    myservo.write(pos); // tell servo to go to position in variable 'pos' 
    delay(15); // waits 15ms for the servo to reach the position 
  } 
  for(pos = 180; pos>=1; pos-=1) // goes from 180 degrees to 0 degrees 
  { 
    myservo.write(pos); // tell servo to go to position in variable 'pos' 
    delay(15); // waits 15ms for the servo to reach the position 
  } 
}

Additional information

Weight37 g