S3003 Servo (3.2 – 4.1 Kgs.cm)

110.00 EGP

Popular standard size economy servo ideal for all standard applications. The same physical size as a Futaba 148, but direct drive as opposed to indirect drive. This makes this a very economic servo.

In stock

Description

The S3003 Servo (3.2 – 4.1 Kgs.cm) is one of the most commonly used servo motors in Arduino projects. This wide range of projects include, home automation, robotics and similar applications.

S3003 Servo Specifications

  • Weight : 37.2 g
  • Dimension : 40mm x 20mm x 44mm
  • Stall Torque : 3.2 kg-cm at 4.8V and 4.1 kg-cm at 6.0V
  •  Temperature Range : 0 degree to 55 degree
  • Operating Speed : 0.19 sec/60 degree(4.8v), 0.23 sec/60 degree(6v)
  • Operation Voltage : 4.8 – 6Volts
  • Gear Type : Plastic
  • Connector Wire Length : 120 mm

Connecting

  • Brown = connect to Arduino – / GND
  • Orange = connect to Arduino +5V
  • Yellow = in this example connect to Arduino Digital port 9

Code

#include <Servo.h> 
 
Servo myservo; // create servo object to control a servo 
// a maximum of eight servo objects can be created 
 
int pos = 0; // variable to store the servo position 
 
void setup() 
{ 
  myservo.attach(9); // attaches the servo on pin 9 to the servo object 
} 
 
void loop() 
{ 
  for(pos = 0; pos < 180; pos += 1) // goes from 0 degrees to 180 degrees 
  { // in steps of 1 degree 
    myservo.write(pos); // tell servo to go to position in variable 'pos' 
    delay(15); // waits 15ms for the servo to reach the position 
  } 
  for(pos = 180; pos>=1; pos-=1) // goes from 180 degrees to 0 degrees 
  { 
    myservo.write(pos); // tell servo to go to position in variable 'pos' 
    delay(15); // waits 15ms for the servo to reach the position 
  } 
}

Additional information

Weight37 g